HOW TO BUILD DIY LED RING LIGHT – A PICTORIAL
To build a DIY LED ring light, I used 3/4 inches plywood because the base for that build (I acquired mine within the bargain bin in the home improvement center, since any cosmetic flaws it might have experienced could be hidden through the duct tape
I used three separate brought strip lights, but I needed to wire them in parallel, for how long these were wired in series, the LEDs in the finish were dimmer. So, I needed to solder that part and reconnected it towards the cord.
I additionally purchased a handheld remote control, which permitted me to dim the ring light from 100% to 50% and 25%.
Step 1: Take a Plywood
Step 2: Mark 2 Concentric Circles
Step 3: Mark an Additional Area to Attach a Pipe
Step 4: Cut the Marked Area
Step 5: Drill Holes
Step 6: Attach Rope to Both Edges
Step 7: Close Up Attached Rope and Overlap Around the Frame
Step 8: Attach Adhesive LED Stripes to the Frame
Finally: Ring Light Powered On!
SAMPLE
If you can’t make it done, you can put the feel easily with Photoshop. Talk to us to build DIY LED ring light effect in Photoshop.
Read more https://clippingpathlab.com/photographers-choose-led-lighting/